Have you ever questioned yourselves on how long the life span of your electronic device? If you call commercial appliances repair service too often, maybe it is not because of the quality of the product. In some cases, the way you maintain it will lead into different result. Probably, one of the cases is yours.

Things to know about commercial appliance repair

Walk-in cooler is an electronic appliance which need attention if you wish it to be well working in long period of time. There are several tips and trick to maintain it so hopefully it reduces the case walk-in cooler repair.

Close the door

First thing first, you need to make sure the door always closed every time none is using it. Additional blocking or propping the door to open turns out will keep the door always closed.

Make it clean

Twice a year minimum, we have to clean the condensing coil and evaporator. Just in case if it is located outside, the coils need to be cleaned way more often than before. Fan motors also becomes part of walk-in cooler repair which needs regular checking. Make sure it still works at optimum speed.

Sometimes, people forget to keep an eye to the airflow. You may find any accumulated trash there and it ruins the whole airflow system. To prevent any damage or restricted airflow, make it adequate and clear airflow and there is supposed to be nothing stacked around the coil.

Commercial appliances repair agent often gets called because of the damage of the ceiling panel. The most common reason is because of the habit to always pile something on top of it. Walk-in cooler is not meant to be that strong, don’t mess it by yourselves.

Invisible but matter

Another invisible problem but has huge potential damage is everything about electrical connection. A damaged wire can cause a lot of bad things, one of the things is making high amperage that will lead into your unit to use more energy. At the end of course, your electric bill is getting higher and higher.

Go maintain the insulation on suction lines between evaporating coil for any decay or damage. If you think the old one needs replacement to support the engine. If so, change it. Also for gaskets between panels. Periodically checking on it will make you know since the very beginning if there is a crack or maybe it is getting weathered. An early diagnose benefits you the most to prepare anything needed.

Do you realize that lamp inside your walk-in refrigerator cause additional heat which makes the engine works harder to lower down the temperature? Before it is getting overload work, turn off the light. A switch to a pilot light gives you alert if the light is turning on but no one opening the door.

Well, I know all this explanation probably mixed you up. How is that possible that maintenance is harder and hassler rather than dealing with the commercial walk in cooler repair Falls Church? Yes, maybe it looks bad at the very first place. But when this regular checking becomes your daily routine, calculate how many financial advantages you get and you will be surprised with the result!